X1E-78-100
Zur Navigation springen
Zur Suche springen
Setup - general steps
- Create a backup USB medium (>32GB) using the tool Wiederherstellungslaufwerk
- Shrink C partition, using Disk manager of System Control, add 2 partitions for Linux root and home
- install Debian to WSL-2
Install Linux parallel to Windows
These steps are the ones I remember to have performed to get Linux running.
Please use these with care; the list of actions may be incomplete or may simply not work on any other device.
Disable secure boot on HP Omnibook X 14
- On windows, go to Einstellungen / System / Wiederherstellung
- Then click on Erweiterter Start / Jetzt neu starten (2x)
- The system reboots into BIOS Setup Utility
- Then set Boot Options / Secure Boot / Disabled
- Optionally, you may disable the USB power while sleep+off (This prevents the USB-C hub to drain battery)
- Then Save Changes and Exit
- Then type the displayed 4digit code and press Enter
- Then reboot into Windows
Prepare a USB memory stick
NO: Get a boot image from https://git.codelinaro.org/linaro/qcomlt/demos/debian-12-installer-image
NO: http://download.opensuse.org/ports/aarch64/tumbleweed/iso/ openSUSE-Tumbleweed-DVD-aarch64-Snapshot20241013-Media.iso
3rd try: create a memory stick and follow the instructions here: https://discourse.ubuntu.com/t/ubuntu-24-10-concept-snapdragon-x-elite/48800
sudo dd if=Downloads/oracular-desktop-arm64+x1e.iso of=/dev/sdb bs=4M conv=sync status=progress
WARNING: Adapt the command before using it; if /dev/sdb is the wrong disk, you destroy your computer. Check e.g. with sudo fdisk --list for the right of= disk.
Install Grub and Linux (1st try)
- On windows, go to Einstellungen / System / Wiederherstellung
- Then click on Erweiterter Start / Jetzt neu starten (2x)
- Wait: The system reboots into BIOS Setup Utility
- Then: Run Problembehandlung / Erweiterte Optionen / UEFI Firmware Einstellungen / Neu Starten
- Then: UEFI Menu appears
- DO NOT RUN THE BOOTMANAGER (It will not run the installer)
- Instead, change the boot order under Setup
Install Grub and Linux (2nd try)
- On windows, go to Einstellungen / System / Wiederherstellung
- Then click on Erweiterter Start / Jetzt neu starten (2x)
- Wait: The system reboots into BIOS Setup Utility
- Then: Run Ein Gerät verwenden / USB ROM Drive
- Then the installer on USB drive boots. Select "Try or install Ubuntu"
- Do a manual install
- do not change the /boot disk-options, only set root and home partitions